C-PLY™ SP TL30 150 CT3,4 12K HS


C-PLY™ SP TL30 150 CT3,4 12K HS is a 150 gsm triaxial spread-tow carbon NCF, 0/+30/-30°, 50 gsm/ply.
It is made using 12K HS carbon fiber.
The special orientation at 30° angles and ultra-lightweight plies, reducing the weight of the material, make this suitable for use on composite parts, according to the direction of mechanical stresses.


Material(s): Carbon

Fibre(s): T700SC

Number of filaments: 12K


Total weight: 150 gsm

Fibres orientation: 0°/+30°/-30° (TL)

0°: 50 gsm

+30° : 50 gsm

-30° : 50 gsm


Assembly: Stitching Mix Polyester 3.4mm


Width(s): 125 cm

Roll Length: 200 ml


  • Powdering an epoxy binder will enhance products stability during cutting and preforming operations. The choice of a binder depends on the matrix compatibility and process conditions. Powdering weight ranges from 5 to 30g/m² and can be adapted to customer requirements (single side, double side) and product constructions.

  • Various Veil (PES, Glass,…) or thin Web (CoPa,…) can be heat set or stitched for Stability, Aspect or Preforming purposes.

  • Online slitting capabilities as narrow as 14 cm (5.5’’).

  • Other angles are possible upon request down to 22,5°.


  • Gap free technology, no resin rich areas.
  • Non Crimp Fabric, better mechanical properties.
  • Optimization of layer construction, cost savings.