C-PLY™ SP Q 600 CT3,4 50K HS
DESCRIPTION
C-PLY™ SP Q 600 CT3,4 50K HS is a 600 gsm quadriaxial carbon NCF, 0/+45/90/-45°, 150 gsm/ply.
It is made using 50K HS carbon fiber.
Plies are combined using a hybrid chain/tricot stitch. Applications are numerous, in marine it can replace several stacked reinforcements at +/45 deg and 0/90 deg for process cost improvement.
Product Line
Material
Material(s): Carbon
Fibre(s): HS (High Strength)
Number of filaments: 50K
Construction
Total weight: 600 gsm
Fibres orientation: 0°/+45°/-45°/90° (QX)
0°: 150 gsm
+45° : 150 gsm
-45° : 150 gsm
90°: 150 gsm
Assembly
Assembly: Needling Mix Polyester 3.4mm
Conditioning
Width(s): 125 cm
Roll Length: 100 ml
Options
-
Powdering an epoxy binder will enhance products stability during cutting and preforming operations. The choice of a binder depends on the matrix compatibility and process conditions. Powdering weight ranges from 5 to 30 g/m² and can be adapted to customer requirements (single side, double side) and product constructions.
-
Various Veil (PES, Glass,…) or thin Web (CoPa,…) can be heat set or stitched for Stability, Aspect or Preforming purposes.
-
Online slitting capabilities as narrow as 14 cm (5.5’’).
Benefits
- Gap free technology, no resin rich areas.
- Non Crimp Fabric, better mechanical properties.
- Optimization of layer construction, cost savings.